Nobilia end panels for top cabinets

End panels for top cabinets cover the visible side of a top cabinet and close it off at the side. If the top cabinet sits on a tall-unit run, the end panel continues all the way to the floor or ends at cabinet height above the plinth panel. If there is no tall unit underneath, the end panel is mounted directly to the top cabinet carcass.

As a certified Nobilia specialist dealer, we deliver the end panel direct from the factory in three to five weeks.

Filter by design, thickness, height, and depth.

With the three filters, you can narrow down the range of top-cabinet end panels to the versions that match your top cabinet and your plan. Thickness, height, and depth are the three key criteria for choosing the right end panel.

An end panel is the visible side panel on a Nobilia top cabinet. It closes off the top-cabinet run at the end or separates two top cabinets from each other. Top-cabinet panels are the same height as the carcass of the top cabinet itself and are mounted at the side of the cabinet without reaching the floor.

Two variants cover the installation situations. The standard panel (UFKW), at 58.3 cm deep, is matched to top cabinets with a 56.1 cm carcass depth and finishes flush with the cabinet front. The Sakura panel (UFKWS) is forward-set and projects 2 cm beyond the cabinet front with a depth of 60.3 cm. Both variants are available in carcass heights of 36 cm and 72 cm. The UFKW is also available in thicknesses of 1 cm, 2.5 cm, and 5 cm, while the UFKWS is available exclusively in 1.6 cm.

An end panel is a permanently visible element of the kitchen. It stands on the outer side of the top cabinet and must remain dimensionally stable for years. At Nobilia, top-cabinet panels are manufactured with a direct coating based on melamine resin and a 1.2 mm PP edge on the front edge, which is more impact-resistant than paper edges. Production takes place at four German sites under the same quality standards as the cabinet carcasses. Certifications such as the RAL quality mark Goldenes M, PEFC, and CARB2 apply to the entire range, including the panel. Nobilia provides a five-year manufacturer's warranty on every top-cabinet panel.

At Nobilia, top-cabinet panels are made from three-layer chipboard. The middle layer consists almost entirely of recycled wood, so the chipboard contains up to 70 percent recycled material overall. The remaining wood comes from sustainably managed forests and is PEFC-certified. For every tree felled, a new one is replanted. Production at the four Nobilia sites is increasingly powered by self-generated solar electricity. In addition, several Nobilia ranges carry the Blue Angel as an official environmental label.