Nobilia panels for tall cabinets

Nobilia panels for tall cabinets provide precise side finishes and stable tall cabinet runs – from pantry units to appliance housing units. All variants are precisely matched to the Nobilia tall cabinet ranges in height 1, 2, 3 as well as the corresponding XL heights. Depending on the plan, you can choose carcass-height or floor-to-floor panels, with or without floor profile, and combine them with plinth heights of 7, 10, 15, or 20 cm. This creates calm lines, concealed plinth areas, and a premium transition to wall or room.

The Nobilia intermediate panel for tall cabinets (HWZ) ensures clean, calm lines between two tall cabinets or appliance housing units. It allows a continuous plinth panel without interruption and thus contributes to a harmonious front appearance.

With a depth of 37.2 cm and thicknesses of 10 / 16 / 25 / 50 mm, it is available in all common Nobilia heights:

• Height 1: 201.6 cm

• Height 2 / XL height 1: 208.8 cm

• Height 3 / XL height 2: 216.0 cm

• XL height 3: 223.2 cm

This makes the intermediate panel universally suitable for all Nobilia tall cabinet variants – from standard to XL.

The Nobilia end panel at carcass height (HWK) provides a clean side finish for tall cabinet runs and allows the plinth panel to continue uninterrupted – for a calm, enclosed front appearance. In handleless kitchens, it integrates ideally with the matching LINE N variants.

With a depth of 58.3 cm and thicknesses of 10 / 16 / 25 / 50 mm, it is available in all common Nobilia heights:

• Height 1: 201.6 cm

• Height 2 / XL height 1: 208.8 cm

• Height 3 / XL height 2: 216.0 cm

• XL height 3: 223.2 cm

This makes the end panel perfect for all tall cabinet variants – from standard to XL height – and ensures a harmonious overall appearance at all times.

The floor-to-floor end panel finishes tall cabinet runs flush with the floor at the side and fully conceals the plinth. It is supplied including floor profile and provides a stable, premium finish. Variants with greater depth are suitable for forward-projected planning.

SKU: HWA / HWAV
Depth: 58.3 cm (standard) | 68.3 cm (projected variant)
Thickness: 10 / 16 / 25 / 50 mm

Carcass and total heights:

• Height 1: 2016 mm → with plinth 7 / 10 / 15 / 20 cm → 2086 / 2116 / 2166 / 2216 mm

• XL height 1 / height 2: 2088 mm → 2158 / 2188 / 2238 / 2288 mm

• XL height 2 / height 3: 2160 mm → 2230 / 2260 / 2310 / 2360 mm

• XL height 3: 2232 mm → 2302 / 2332 / 2382 / 2432 mm

Panel feet: available in 014 stainless steel look or 010 black.

The HWA variants offer a precise side finish for all Nobilia tall cabinet heights. The HWAV version is designed for projected planning and, with a depth of 68.3 cm, provides visually flush transitions for front projections.

The room-planning panel at carcass height (HWKR / HWKVL) is ideal for side finishes on freestanding tall cabinets, niches, or island plans. Both sides are edge-banded, making it suitable for freely visible sides as well. In the lacquered version (HWKVL), the front and back are additionally finished with lacquered edges – for a particularly premium look.

Depth: 25 – 116.6 cm (standard) or 78 cm in lacquered version
Thickness: 10 / 16 / 25 / 50 mm

Carcass heights / panel heights:

• Height 1: 201.6 cm

• Height 2 / XL height 1: 208.8 cm

• Height 3 / XL height 2: 216.0 cm

• XL height 3: 223.2 cm

This makes the room-planning panel perfect for placing tall cabinets freely in the room at all Nobilia heights or for neatly finishing niche edges.

The floor-to-floor room-planning panel (HWR / HWVL) is ideal for freestanding tall cabinet blocks, projected tall cabinets, or island plans. It fully conceals the plinth at the side, is supplied including floor profile, and provides a stable, full-height finish with a premium appearance.

Depth: 25 – 116.6 cm (standard) | 78 cm (projected version)
Thickness: 10 / 16 / 25 / 50 mm

Carcass and total heights:

• Height 1: 2016 mm → with plinth 70 / 100 / 150 / 200 mm → 2086 / 2116 / 2166 / 2216 mm

• XL height 1 / height 2: 2088 mm → 2158 / 2188 / 2238 / 2288 mm

• XL height 2 / height 3: 2160 mm → 2230 / 2260 / 2310 / 2360 mm

• XL height 3: 2232 mm → 2302 / 2332 / 2382 / 2432 mm

Panel feet are available in 014 stainless steel look or 010 black.
Lacquered variants (HWVL) receive a clean polymer cut edge when depth reductions are made, ensuring the highest workmanship quality even with custom size adjustments.

All panels described here are precisely matched to the Nobilia tall cabinet ranges and follow the typical Nobilia grid dimensioning. This allows all tall cabinet heights – from standard to XL – to be planned precisely and with a visually harmonious result.

Carcass and panel heights:

• Height 1: 201.6 cm

• XL height 1 / height 2: 208.8 cm

• XL height 2 / height 3: 216.0 cm

• XL height 3: 223.2 cm

The total heights of the floor-to-floor panels are calculated from the respective carcass height plus plinth height (7 / 10 / 15 / 20 cm) and range overall from approx. 208.6 to 243.2 cm.

This means you can find the right panel for every tall cabinet type – regardless of whether you are planning a standard or XL height. All variants are available in numerous decors, lacquer finishes, and thicknesses and can be combined with panel feet in stainless steel look (014) or black (010).