Nobilia end panels for highboards

A highboard end panel covers the visible side of a highboard at the end of a run or in a freestanding installation. Depending on the situation, you choose an end panel against the wall, a room-planning panel for islands, or an intermediate panel between two cabinets. All variants are matched to the Nobilia carcass heights of 151.2 cm standard and 158.4 cm XL. Thicknesses range from 1 cm to 1.6 cm and 2.5 cm up to 5 cm.

As a certified Nobilia specialist dealer, we deliver the panel directly from the factory in three to five weeks, in your kitchen’s selected front finish.

Filter now by thickness, height, and depth

Using the filters, you will only see the variants from the complete highboard end panel range that match your planning. The fastest way to get results is to first choose the thickness, then the height, and finally set the depth.

An end panel is the visible side panel on a Nobilia highboard. It finishes the tall cabinet run at the end, covers exposed carcass sides, and frames freestanding highboards. Instead of a raw carcass side, the panel shows a front finish, worktop look, or a color contrast. It is supplied from the factory in your kitchen’s color.

Three types cover the common installation situations:

• The end panel (HWA, HWK) frames the end of a tall cabinet run or a single highboard next to base cabinets.

• The room-planning panel (HWR, HWKR) is used on freestanding highboards. Both visible sides are edged.

• The intermediate panel (HWZ) creates spacing between two highboards or between a highboard and an appliance housing cabinet with an oven or microwave. This prevents front-to-front transitions.

Each type comes in two constructions. In the floor-to-ceiling version, the panel runs down next to the plinth to the floor and replaces the plinth panel there. The floor connection is formed by the included floor profile or the panel shoe. At carcass height, the panel ends at plinth level, and the plinth panel runs continuously along in front of it.

All panels come from the factory in the selected front finish and are installed between the tall cabinets during kitchen assembly.

Panel shoes and end caps are included ex works with every floor-to-ceiling side panel. Here you can find the parts for replacement purchase if one is missing or damaged. Support brackets are recommended for dishwasher layouts at the end of a run and for freestanding room-planning side panels.

A sideboard side panel is visible over the entire carcass height. Standard sideboards have a carcass height of 151.2 cm, XL versions 158.4 cm. Over the years, warping of the panel and swelling at the edge become visible on this surface. Nobilia therefore tests panel stability, edge sealing and color fastness in its in-house QM testing laboratory, with a test duration corresponding to a minimum service life of 15 years.

Nobilia has manufactured exclusively in Germany since 1945 and is certified according to ISO 9001, ISO 14001 and ISO 50001, with annual audits by TÜV Rheinland. The RAL quality mark Goldenes M documents compliance with the RAL-GZ 430 quality standards, and the Blue Angel applies to many front ranges and verifies reduced pollutant emissions in living spaces.

A sideboard side panel consists predominantly of engineered wood. Nobilia sources this from PEFC-certified forests managed according to sustainable forestry standards. The engineered wood materials comply with the limits of CARB2 (California Air Resources Board), TSCA Title VI and the Japanese F-Four-Star standard, so formaldehyde emissions in living spaces remain below the strictest international requirements. The DGM emissions label according to RAL-GZ 437 confirms the highest emissions class A.

For lacquered sideboard side panels from the premium matt line, Nobilia dispenses with virgin fibers and manufactures the fronts to be fully recyclable. This allows you to choose a side panel whose material can be recycled at the end of its service life. Production takes place at four sites in Germany with in-house power generation, optimized route planning in goods transport and recyclable packaging.

Over a service life of 15 years, the tested durability significantly reduces resource consumption per year.