Nobilia corner wall cabinets

The corner in a wall cabinet run often remains unused in many kitchens. Nobilia corner wall cabinets close this gap and make the space above the worktop fully usable.

There is a suitable type for every installation situation. The half-corner wall cabinet sits directly in the wall corner with a 90° carcass and neatly connects two wall cabinet runs. The double-door corner wall cabinet makes maximum use of the corner with a square full carcass and two 165° hinges. The diagonal corner wall cabinet creates a harmonious transition to adjoining cabinets with a 45° angled front.

Filter by width and height to find the right model.

The corner in a wall cabinet run is often a dead corner. Corner wall cabinets solve this problem and open up storage space that would be lost with a straight cabinet run. They are specially designed for installation in the wall corner and differ structurally from standard wall cabinets. Depending on the cabinet type, the corner is closed with a 90° carcass, a square full carcass, or an angled front. All three types are deeper than a standard wall cabinet and blend into the existing kitchen run in almost all Nobilia front decors. Suitable models in 60 cm width are also available for smaller kitchens with limited space in the corner.

Choose the same carcass height for the corner wall cabinet as for your other wall cabinets. Only then will the visual line of the kitchen run remain consistent and the proportions look right. Nobilia plans all wall cabinets in the N144 grid. All heights are coordinated with the 32 mm drilling grid system and fit together precisely.

If you use your base cabinets as a guide: wall cabinets in 72 cm match standard base cabinets with a 72 cm carcass height. Wall cabinets in 79.2 cm match XL base cabinets with 79.2 cm. Wall cabinets in 86.4 cm match Maxi base cabinets with 86.4 cm.

The half-corner wall cabinet is suitable if the corner is built on only one side or the available wall space is limited. It is the most compact solution and is available from 60 cm width. The double-door corner wall cabinet is the right choice if maximum storage space in the corner is required and there is sufficient space on both sides for the two doors. The diagonal corner wall cabinet is suitable if the visual line of the kitchen takes priority. It closes the corner with a calm visual finish, but offers less interior volume than the double-door type. If you are unsure which type fits your corner, our customer service team will be happy to help.

Nobilia corner wall cabinets are tested in the QM testing laboratory for a minimum service life of 15 years. The wall suspension is designed for a load capacity of 75 kg. You can find all testing procedures and quality values in our Nobilia quality guide.

The wood-based materials for Nobilia corner wall cabinets come from PEFC-certified forests, and the chipboard consists of up to 70% recycled wood material. Further information on certifications and sustainability projects can be found in our Nobilia sustainability guide.