Original Nobilia glass frame doors for wall cabinets

Here you will find original Nobilia glass frame doors for reordering, in heights from 71.7 to 129.3 cm and widths from 30 to 120 cm. Precisely fitting selected Nobilia wall cabinet series, available in the following versions:

• Glass frame doors & partially glazed variants

• Segment glass doors for Boulevard wall cabinets

• Glass frame folding lift doors for wall cabinets

• Flat glass doors with aluminum frame

• Square glass doors and Square folding lift doors

Filter by the height and width of your cabinet and find your glass frame door.

The following filters help you display exactly the variants from all glass frame doors that fit your wall cabinet. The fastest way to get the right result is to choose the height first and then narrow the selection by width.

Nobilia glass frame doors are original fronts. The dimensions are binding, because only if the height and width fit your wall cabinet exactly will the new front sit flush and the hinges engage without rework. There are two ways to determine the correct size.

1. You still have the old door

Measure the front from outer edge to outer edge, once for the height and once for the width. You can enter these values directly into the filters above.

2. Only the cabinet is still there

You can find the article number of your wall cabinet (for example WG60-1) in your kitchen purchase contract or on the type plate inside the cabinet carcass. Enter the number in the search above. On the cabinet page, you will find the product drawing that shows you the exact front height in millimeters.

An example: For the WG60-1, the drawing shows the value 717. This corresponds to a front height of 71.7 cm. Enter this value first in the height filter. Then narrow it down by width, in this case to 60 cm.

A quick note on the relationship between carcass and front

The front is always slightly smaller than the cabinet carcass so that the door can swing open without rubbing. For the WG50-2, for example, the carcass measures 79.2 cm in height, while the matching front is 78.9 cm. The same applies to the width. Depending on the series, a 50 cm wide cabinet takes a front that is either 50 cm or 49.4 cm wide. Your cabinet’s product drawing clearly shows both values.

Not sure which height belongs to your cabinet? Our service team can check that with you in two minutes.

Nobilia tests all fronts in its own QM testing laboratory for a minimum service life of 15 years. Hinged doors undergo up to 80,000 opening cycles. Sensys hinges with integrated Silent System damping are installed as standard and close the door gently and quietly, regardless of the front weight. The wood-based materials and lacquers used meet the strictest formaldehyde standards according to CARB2 and F-Four-Star. The GS certification mark from TÜV and the RAL Golden M quality mark independently confirm tested safety and material quality. All Nobilia furniture has been produced exclusively in Germany since 1945.

If you only replace the glass frame door, you keep the entire cabinet carcass. Hinges, shelves, and fittings remain installed; only the front is repurchased. It comes from the current Nobilia range and fits the existing carcass without adjustment. Nobilia uses only wood-based materials from PEFC-certified, sustainably managed forests. All furniture achieves the highest emission class A according to RAL-GZ 437, and many front programs also carry the Blue Angel label. As a member of the DGM Climate Pact, Nobilia continuously reduces the CO₂ footprint of its production. Manufacturing has taken place exclusively in Germany since 1945.