Buy Nobilia fronts individually
A damaged door, a new color concept, or a remodel: Nobilia front panels are available as individual parts, made to fit precisely in the front color of your existing Nobilia range. You choose width and height according to your cabinet type – the front is manufactured in your selected front color and delivered directly to your address. Available as a continuous door front, drawer front, tall cabinet front, and segment glass front.
Filter now by height and width and find your front.
No results found for your filters.
Find the right front by height and width
Filter by front height
Common front heights in the Nobilia range are 14.1 cm, 28.5 cm, and 35.7 cm for drawers and pull-outs. For base and wall cabinets, use 57.3 cm, 71.7 cm, 78.9 cm, and 86.1 cm. For highboards and tall cabinets, filter by 129.3 cm, 201.3 cm, 208.5 cm, 215.7 cm, and 222.9 cm.
The front height depends on the cabinet type and its carcass height. A base cabinet with a 72 cm carcass height has a front that is 71.7 cm high.
Filter by front width
Common front widths in the Nobilia range are 14.4 cm, 19.4 cm, 24.4 cm, 29.4 cm, 34.4 cm, 39.4 cm, 44.4 cm, 49.4 cm, 54.4 cm, 59.4 cm, 79.4 cm, 89.4 cm, 99.4 cm, and 119.4 cm.
Use the cabinet width as the starting point and filter by the next matching value. A cabinet that is 60 cm wide has a front that is 59.4 cm wide.
Front types at a glance
How to determine your front dimensions
Nobilia front panels are made to fit your existing kitchen exactly. The correct dimensions are the prerequisite for precise installation without rework. There are two ways to find the right front panel:
If you still have the old front, measure the height and width from outer edge to outer edge.
The product diagram of your cabinet shows the front height of each individual front. Set the height filter first, then narrow down the width filter to the cabinet width.
Example: The UA50 base cabinet with pull-out has three fronts in two different heights. The product diagram shows 141 mm for the upper drawer and 285 mm for the two pull-outs. Since the cabinet is 50 cm wide, all three fronts are 49.4 cm wide. You need F141-494 once and F285-494 twice. First filter by height 14.1 cm and width 49.4 cm, then by height 28.5 cm and width 49.4 cm.
What you need to know about drillings before ordering
Whether your new front is delivered pre-drilled depends on the year your kitchen was built.
Kitchens built from 2015 onward Nobilia applies hinge cup, handle, and front connection drillings directly during production. The front arrives ready for installation.
Kitchens built before 2015 The old drilling patterns are no longer available in Nobilia production. Fronts are supplied without drillings. Hire a carpenter for cup hinge drillings, handle drillings, and front connection drillings. This work can generally be carried out with standard tools.
Questions? We’re easy to reach.
Do you have questions about configuration, compatibility with your existing kitchen, or your order?
Our customer service is available Mon–Fri from 09:00 to 19:00 by phone and email.
Which front type fits your cabinet?
Fronts for drawers, flaps & pull-outs
Front panels for drawers, pull-outs, and flaps are purchased individually when a damaged front needs to be replaced or the front look of the entire kitchen is to be changed. Only the original Nobilia front in your front color looks as if nothing ever happened. Heights from 8.2 to 35.7 cm, widths from 19.4 to 119.4 cm.
Dimensions:
Height: 8.2 cm ▪ 11.2 cm ▪ 14.1 cm ▪ 15.4 cm ▪ 15.7 cm ▪ 17.1 cm ▪ 17.5 cm ▪ 17.7 cm ▪ 18.7 cm ▪ 21.3 cm ▪ 23.4 cm ▪ 25.0 cm ▪ 26.2 cm ▪ 28.5 cm ▪ 30.1 cm ▪ 34.5 cm ▪ 35.7 cm
Width: 19.4 cm ▪ 29.4 cm ▪ 39.4 cm ▪ 44.4 cm ▪ 49.4 cm ▪ 59.4 cm ▪ 79.4 cm ▪ 89.4 cm ▪ 99.4 cm ▪ 119.4 cm
Fronts for doors
Door fronts for base and wall cabinets are available in three heights that follow the Nobilia body height system: 71.7 cm for standard kitchens, 78.9 cm for XL, and 86.1 cm for Maxi. Pinned fronts consist of two parts with a dowel connection and create a visually continuous line where drawer and door are stacked one above the other. Widths from 14.4 to 119.4 cm cover all cabinet widths in the Nobilia range.
Dimensions
Height: 42.9 cm ▪ 50.1 cm ▪ 57.3 cm ▪ 64.5 cm ▪ 70.9 cm ▪ 71.7 cm ▪ 78.1 cm ▪ 78.9 cm ▪ 86.1 cm
Width: 14.4 cm ▪ 19.4 cm ▪ 24.4 cm ▪ 29.4 cm ▪ 34.4 cm ▪ 39.4 cm ▪ 44.4 cm ▪ 49.4 cm ▪ 54.4 cm ▪ 59.4 cm ▪ 79.4 cm ▪ 89.4 cm ▪ 99.4 cm ▪ 119.4 cm
Fronts for tall cabinets
Nobilia tall cabinet fronts are available as individual door segments and as continuous fronts over the full cabinet height. Fronts from 201.3 cm upward are fitted as standard with a tension fitting positioned centrally on the inside to stabilize the front against warping. The pantry cabinet is excluded. Door segments are available in heights from 93.3 to 158.1 cm, continuous fronts in heights from 201.3 to 222.9 cm. All tall cabinet fronts are available in widths from 29.4 to 59.4 cm.
Dimensions
Height 93.3 cm ▪ 100.5 cm ▪ 107.7 cm ▪ 114.9 cm ▪ 122.1 cm ▪ 129.3 cm ▪ 136.5 cm ▪ 143.7 cm ▪ 150.9 cm ▪ 158.1 cm ▪ 201.3 cm ▪ 208.5 cm ▪ 215.7 cm ▪ 222.9 cm
Width 29.4 cm ▪ 39.4 cm ▪ 44.4 cm ▪ 49.4 cm ▪ 59.4 cm
Segment glass fronts for wall cabinets with swing flap
The segment glass front is the replacement front for the Nobilia wall cabinet WKSGLS with lift-up flap. The glass section, front finish, handle, and hinges are supplied together. The glass is available in clear glass, frosted glass, or black glass, while the front color depends on the Nobilia program. The glass provides a view of the contents and turns the cabinet into a display surface. The lift-up flap opens upward without swinging into the work area. The front is 71.7 cm high and available in widths from 49.4 to 89.4 cm.
Dimensions
Height: 71.7 cm
Width: 49.4 cm ▪ 59.4 cm ▪ 79.4 cm ▪ 89.4 cm
Installation of Nobilia fronts
Nobilia fronts are mounted at the same fixing points as the original front. The videos show the most important installation steps for drawers, pull-outs, wall cabinets, and lift doors. The installation instructions for hinged doors as well as drawers and front pull-outs are available as PDF downloads.
Frequently asked questions about Nobilia front panels
Questions about your nobilia kitchen? We’re here to help!
Are you planning a nobilia kitchen or do you need support after your purchase? We’re here for you — from dimensions and equipment to installation, spare parts and matching accessories. Call us or write to us and we’ll help you quickly.
Phone: +49-69-400-500-820
Email: info@wunschkueche.com
Available: Mon–Fri 09:00–19:00
You can find more Nobilia fronts here
Tested Nobilia quality
What you touch every day must impress every day. Nobilia tests all fronts, drawers, and pull-outs in its own QM testing laboratory for a minimum service life of 15 years – hinged doors undergo up to 80,000 opening cycles, while drawers and pull-outs undergo up to 80,000 load changes. The Sensys hinges with integrated Silent System damping are installed as standard in all cabinet types and close doors gently and silently – regardless of front weight. The nBOX drawer system with its 10.7 mm side panel and concealed undermount runner offers premium technology as standard. Independently confirmed by the TÜV GS safety mark and the RAL Goldenes M quality mark – equally across all price groups.
Nobilia's sustainability strategy
Nobilia uses only wood from PEFC-certified forests. The formaldehyde levels of the fronts comply with CARB2 and the Japanese F-Four-Star standard — the strictest limits in the world for furniture emissions. Many Nobilia programs carry the Blue Angel, the strict German environmental label for low-emission furniture.
Still haven’t found your new cabinet door or drawer front?
Nobilia front panels are manufactured at the factory in your front color after ordering and delivered pre-assembled. Filter by height and width and order the front that fits.
Customer service
You can also get personal support by phone: +49 69 400 500 820 (Mon–Fri: 9 am–7 pm)
Learn more
Send us your inquiry!
Our customer service team will be happy to help you with questions about Nobilia cabinets and your order.
Learn more
Delivery
Free freight delivery to your doorstep – with no minimum order value.
Payment
Pay flexibly via Klarna, PayPal, credit card, or invoice – securely & at no extra charge.
Learn more
Planning
We help you find and configure the right cabinets for your dream kitchen.
Learn more
Assembly
If you wish, we can connect you with installers experienced with Nobilia directly in your area.
Learn more
10 years of manufacturer goodwill
Nobilia stands for quality with 10 years of manufacturer goodwill – secured for you directly from the factory.