Nobilia cover panels - 16 mm thickness

A cover panel in 16 mm thickness is the standard version among Nobilia cover panels. The thickness describes the panel's thickness, not its depth or width. 16 mm equals 1.6 cm. A slimmer thickness is only available in 10 mm. The 25 mm and 50 mm thicknesses are more substantial. At the upper edge of the cabinet, 16 mm creates a medium-height material edge. It appears neither deliberately slim nor deliberately massive and therefore suits most kitchen styles. 16 mm is the only thickness to combine all eight finish groups, from matte laminate decor to ultra-high-gloss lacquer. That is why it offers the largest selection of designs, finishes and colors.

This cover panel comes in a fixed width and covers highboards and tall cabinets. The laminate panel is coated on both sides. At the front and sides, it has a polymer edge. The depth is 58.5 cm and can be adjusted up to 60 cm if required.

Three fixed widths are available. 48.2 cm covers a dishwasher conversion unit with a cabinet width of 45 cm. 60 cm fits a highboard with a width of 60 cm. 63.2 cm covers a dishwasher conversion unit with a cabinet width of 60 cm.

Both dishwasher conversion units receive a panel that is wider than the cabinet itself. The highboard is covered at the same width.

Dimensions:

• Width: 48.2 cm ▪ 60 cm ▪ 63.2 cm

• Depth: Variable from 58.5 cm to 60 cm

• Thickness: 1 cm

This cover panel is the lacquered version for a single highboard or a single tall cabinet. The panel is lacquered on both sides. At the front and sides, it has a lacquered edge. This means the panel adopts the look of lacquered fronts and remains in the same material as the kitchen.

The width is fixed at 63.6 cm. The depth is 58.5 cm and can be adjusted up to 60 cm.

If the panel is shortened to a smaller width, the cut edge receives a polymer edge. At that point, it is not lacquered.

Dimensions:

• Width: 63.6 cm

• Depth: 58.5 cm to 60 cm

• Thickness: 1.6 cm

With the Sakura cover panel, you finish the top side of your highboard, tall cabinet or sideboard in Como Oak reproduction. The panel is coated on both sides in decor 362 Como Oak reproduction. There is a polymer edge at the front and sides. Three depths are available, each matched to the extra-deep Sakura side panels that project as a frame beyond the carcass edge.

The Sakura design line combines side panels, cover panels and the Slim-Line worktop APSLNS61 into a closed frame look in wood decor. The surface-mounted handle rail 315 in Como Oak is a fixed part of the configuration. Sakura is not available for the ranges Cascada 684, Frame 419, Inline 526, Nordic 782, Pura 917 and Sylt 706.

Dimensions

• Depth: 39.4 cm ▪ 50.5 cm ▪ 60.5 cm

• Length: 25 cm to 258 cm

• Thickness: 1.6 cm

A cover panel in 16 mm thickness can be mounted to the underside of wall cabinets and forms the underside there, i.e. the visible lower surface of the cabinets. Nobilia can mill LED spots into this underside. The spots evenly illuminate the work surface below.

This recessed lighting requires a material thickness of at least 16 mm. Only from this thickness onward is the panel deep enough for the LED spots to be recessed with the necessary milling depth.

We deliver directly from the factory in Verl, usually three to five weeks after ordering. Shipping within Germany is free of charge.

Components are supplied made to order with the depth, length, and edge configuration specified when you place your order. The only thing left for you to do on site is mount them on the cabinet.

If you do not want to or cannot install it yourself, we can refer you to an installation partner in your region. Talk to us before ordering so we can plan the logistics from the start.

Nobilia tests how a 16 mm thick cover panel holds up in everyday use in its own QM testing laboratory. There, the company tests furniture, components, and materials for their suitability for daily use over 15 years. A cover panel is one of these components. The panel material is subject to the same tests.

In addition to the internal tests, independent seals confirm the quality. TÜV Rheinland tests every program in the collection with the GS mark for tested safety, the only legally regulated test mark for product safety in Europe. The German Furniture Quality Association also awards the RAL quality mark Goldenes M, which is carried by all furniture leaving the factory. Nobilia’s quality management has also been certified to ISO 9001 since 1994. These tests apply to the entire collection. The 16 mm thick cover panel is no exception.

Select the matching cover panel in 16 mm thickness using the filter at the top of the page. You need two measurements for this: the depth and the width of your cabinet carcass. Add the overhang to both measurements, which is how far the cover panel extends beyond the carcass. Enter both values in the filter. The remaining cover panels are the ones that fit your cabinet.