en
Germany
Nobilia frame parts for base cabinets

For base cabinets

Nobilia frame parts for tall cabinets

For tall cabinets

Nobilia frame parts for wall cabinets

For wall cabinets

Nobilia frame parts for base cabinets

Frame part
URTD30

Frame part

Width: 30 cm
Height: 72 cm
Depth: 11 cm

The Nobilia frame part URTD30 makes it possible to install a base cabinet in an extremely narrow frame construction. 11 cm carcass depth, 72.0 cm carcass height – for plans with special installation situations. Technical data: • Product type: Base cabinet frame part • Carcass height: 72.0 cm (standard) • Frame part, 1 continuous door, without plinth, carcass depth: 11 cm • Made in Germany | 5-year manufacturer warranty | Original Nobilia product The Nobilia n144 grid system ensures that end panels, filler strips and pilasters are matched exactly to the carcass heights and depths of the base cabinet run – no remeasuring, no on-site adjustment. Plinth panels are mounted continuously on end and intermediate panels – no offset, no visible transition between cabinet and panel in the plinth area. The Vario-Clip fastening of the rear cladding enables drill-free installation directly on the carcass – no drilling, no screwing, no repairing the carcass afterward. Scope of delivery: • Delivered direct from the factory – exactly in the ordered Nobilia front finish. • Suitable for all current Nobilia base cabinet systems with the n144 grid system. • Ordering tip: use the color number from the original Nobilia purchase contract. • Delivery time approx. 3–4 weeks | free shipping. Nobilia-recommended specialist dealer since 2015: direct delivery, free shipping, approx. 3–4 weeks. Personal contact – no call center. For extensions: always use the color number from the purchase contract – not the dealer name. We work exclusively with Nobilia original codes.

ab
90.28
€

Delivery time: 3 – 5 weeks

XL frame unit
URTD30-X

XL frame unit

Width: 30 cm
Height: 79.2 cm
Depth: 11 cm

The Nobilia frame unit URTD30-X makes it possible to install a base cabinet in an extremely slim frame construction. 11 cm carcass depth, 79.2 cm carcass height – for plans with special installation situations. Technical data: • Product type: Base cabinet frame unit • Carcass height: 79.2 cm (XL) • XL frame unit, 1 full-height door, without plinth, carcass depth: 11 cm • Made in Germany | 5-year manufacturer's warranty | Original Nobilia product Plinth panels are mounted continuously across end and intermediate side panels – no offset, no visible transition between cabinet and side panel in the plinth area. The Vario-Clip attachment of the rear panel cladding enables drill-free installation directly on the carcass – no drilling, no screwing, no repair of the carcass afterwards. Filler strips with U-seal compensate for wall unevenness and prevent dirt and moisture from getting behind the base cabinet run – an underestimated planning detail. Scope of delivery: • Original Nobilia product, delivered direct from the factory – no middleman. • Compatible with current Nobilia ranges based on the n144 grid system. • For extensions: use the original Nobilia code (color number) from the purchase contract. • Delivery time approx. 3–4 weeks | free shipping. As an online shop recommended by Nobilia since 2015, we deliver original products directly from the factory. Free shipping, approx. 3–4 weeks. Personal contact in Frankfurt am Main. Existing customer? Use the decor number from the original purchase contract. Dealer names vary.

ab
90.67
€

Delivery time: 3 – 5 weeks

Maxi frame part
URTD30-M

Maxi frame part

Width: 30 cm
Height: 86.4 cm
Depth: 11 cm

The Nobilia frame part URTD30-M makes it possible to install a base cabinet in an extremely narrow frame construction. 11 cm carcass depth, 86.4 cm carcass height – for plans with special installation situations. Technical data: • Product type: Base cabinet frame part • Carcass height: 86.4 cm (Maxi) • Maxi frame part, 1 continuous door, without plinth • Made in Germany | 5-year manufacturer warranty | Original Nobilia product The planning dimension – also called installation dimension – indicates the actual space required in the wall corner. The Nobilia standard planning dimension is 65 × 65 cm: from the corner, 65 cm to the left and 65 cm to the right. With a standard planning dimension of 65 × 65 cm, the leg dimension of the corner filler piece is 7 × 7 cm. The leg dimension describes the visible front surface of the filler transition in the corner. Variable corner filler pieces allow a planning dimension of 63–75 cm per side. This results in a leg dimension of 5 cm (with a 63 cm planning dimension) up to 17 cm (with a 75 cm planning dimension) – for wall corners that are not exactly 90° or require different clearance dimensions. Scope of delivery: • Direct from the factory: no detour via retailers, exactly the original Nobilia product ordered. • Suitable for all Nobilia base cabinet systems based on the n144 grid system. • Extension purchase: use the color number from the purchase contract, not the dealer name. • Delivery time approx. 3–4 weeks | free shipping. As an online shop recommended by Nobilia since 2015, we deliver original products direct from the factory. Free shipping, approx. 3–4 weeks. Personal contact in Frankfurt am Main. Kitchen extension: use the color number from the purchase contract, not the dealer name. Nobilia original codes – this ensures the accessories match the existing run exactly.

ab
91.09
€

Delivery time: 3 – 5 weeks

Frame part
URTD40

Frame part

Width: 40 cm
Height: 72 cm
Depth: 11 cm

The Nobilia frame part URTD40 makes it possible to install a base cabinet in an extremely narrow frame construction. 11 cm carcass depth, 72.0 cm carcass height – for plans with special installation situations. Technical data: • Product type: base cabinet frame part • Carcass height: 72.0 cm (standard) • Frame part 1 continuous door, without plinth, carcass depth: 11 cm • Made in Germany | 5-year manufacturer's warranty | Original Nobilia product Angle fillers in split-look design are made from two connected original fronts – the result is a visually seamless transition that matches the rest of the kitchen range. The angle filler in door design visually imitates a hinged door in the corner area – for plans where the corner should also have a front look without an actual cabinet being there. ISO 9001 (since 1994) certified by TÜV Rheinland: the quality management system is externally audited annually – not a one-time stamp, but continuous inspection. Scope of delivery: • Direct from factory: no detour via retail, exactly the original Nobilia product ordered. • Suitable for all Nobilia base cabinet systems according to the n144 grid. • Extension purchase: use the color number from the purchase contract, not the retailer name. • Delivery time approx. 3–4 weeks | free shipping. Nobilia-recommended specialist retailer since 2015: direct delivery, free shipping, approx. 3–4 weeks. Personal contact – no call center. Kitchen extension: use the color number from the purchase contract, not the retailer name. Nobilia original codes – this ensures the accessories match the existing run exactly.

ab
93.87
€

Delivery time: 3 – 5 weeks

XL frame unit
URTD40-X

XL frame unit

Width: 40 cm
Height: 79.2 cm
Depth: 11 cm

The Nobilia frame unit URTD40-X makes it possible to install a base cabinet in an extremely narrow frame construction. 11 cm carcass depth, 79.2 cm carcass height – for plans with special installation situations. Technical data: • Product type: base cabinet frame unit • Carcass height: 79.2 cm (XL) • XL frame unit, 1 continuous door, without plinth, carcass depth: 11 cm • Made in Germany | 5-year manufacturer warranty | Original Nobilia product Hardwood dowels 8×30 mm with water-resistant glue connect all carcass parts – no clip system, no plastic connectors. This also applies to side panels with carcass connection. Galvanized metal connecting screws join cabinets into a stable run – cabinet sides are not pre-drilled, each connection is fitted precisely on site. The white interior carcass is no arbitrary decision: white reflects light, shows dirt immediately, and can be cleaned completely with a damp cloth. Scope of delivery: • Original Nobilia product, delivered ex works – no middleman. • Compatible with current Nobilia programs based on the n144 grid. • For extensions: use the Nobilia original code (color number) from the purchase contract. • Delivery time approx. 3–4 weeks | free shipping. Nobilia-recommended specialist dealer since 2015: direct delivery, free shipping, approx. 3–4 weeks. Personal contact – no call center. Existing customer? Use the decor number from the original purchase contract. Dealer names vary.

ab
94.28
€

Delivery time: 3 – 5 weeks

Maxi frame unit
URTD40-M

Maxi frame unit

Width: 40 cm
Height: 86.4 cm
Depth: 11 cm

The Nobilia base cabinet frame unit URTD40-M is designed for plans in which a base cabinet with a continuous or pinned door is installed in frame construction – 11 cm carcass depth, without plinth. 86.4 cm carcass height. Technical data: • Product type: Base cabinet frame unit • Carcass height: 86.4 cm (Maxi) • Maxi frame unit, 1 continuous door, without plinth • Made in Germany | 5-year manufacturer's warranty | Original Nobilia product 5-year Nobilia warranty: Applies equally to cabinets and accessory parts – delivered direct from the factory, with no retail intermediary. Nobilia manufactures more than 8.5 million cabinets and accessory parts per year at 4 German sites across 439,000 m² – Europe's largest kitchen manufacturer. Applied PP edge in the side panel color on all visible edges – precisely color-matched, permanently bonded, with no warping. Scope of delivery: • Direct from the factory: no detour via retailers, exactly the original Nobilia product ordered. • Suitable for all Nobilia base cabinet systems based on the n144 grid system. • For extension purchases: use the color number from the purchase contract, not the dealer name. • Delivery time approx. 3–4 weeks | free shipping. Nobilia-recommended specialist dealer since 2015: Direct delivery, free shipping, approx. 3–4 weeks. Personal contact – no call center. Kitchen extension: Use the color number from the purchase contract, not the dealer name. Original Nobilia codes – this ensures the accessory matches the existing run exactly.

ab
95.09
€

Delivery time: 3 – 5 weeks

Frame element
URTD45

Frame element

Width: 45 cm
Height: 72 cm
Depth: 11 cm

The Nobilia frame element URTD45 makes it possible to install a base cabinet in an extremely narrow frame construction. 11 cm carcass depth, 72.0 cm carcass height – for plans with special installation situations. Technical data: • Product type: Base cabinet frame element • Carcass height: 72.0 cm (Standard) • Frame element, 1 full-height door, without plinth, carcass depth: 11 cm • Made in Germany | 5-year manufacturer warranty | Original Nobilia product GS mark by TÜV Rheinland: ease of use, load capacity, material consistency, and safety independently tested – not just declared, but proven. PEFC certificate: the wood comes from sustainably managed forests. Independent bodies inspect the supply chain every year – from the forest to Nobilia production. CARB2, TSCA Title VI, F-Four-Star: Nobilia meets the strictest international formaldehyde standards. Emission class A according to RAL-GZ 437 demonstrably protects indoor air quality. Scope of delivery: • Original Nobilia product, delivered from the factory – no middlemen. • Compatible with current Nobilia ranges based on the n144 grid. • For extensions: use the original Nobilia code (color number) from the purchase contract. • Delivery time approx. 3–4 weeks | free shipping. As an online shop recommended by Nobilia since 2015, we deliver original products directly from the factory. Free shipping, approx. 3–4 weeks. Personal contact in Frankfurt am Main. Existing customer? Use the decor number from the original purchase contract. Dealer names may vary.

ab
96.67
€

Delivery time: 3 – 5 weeks

XL frame component
URTD45-X

XL frame component

Width: 45 cm
Height: 79.2 cm
Depth: 11 cm

The Nobilia frame component URTD45-X makes it possible to install a base cabinet in an extremely narrow frame construction. 11 cm carcass depth, 79.2 cm carcass height – for plans with special installation situations. Technical data: • Product type: base cabinet frame component • Carcass height: 79.2 cm (XL) • XL frame component, 1 continuous door, without plinth, carcass depth: 11 cm • Made in Germany | 5-year manufacturer's warranty | Original Nobilia product The angled filler piece in door design visually imitates a hinged door in the corner area – for plans where the corner should also have a front appearance, even though there is no cabinet there. ISO 9001 (since 1994) certified by TÜV Rheinland: the quality management system is externally audited every year – not a one-time stamp, but continuous inspection. ISO 14001 (since 2007): environmental management system certified – energy consumption, emissions, and resource use in production are systematically monitored and reduced. Scope of delivery: • Delivered direct from the factory: no detour through retail, exactly the Original Nobilia product ordered. • Suitable for all Nobilia base cabinet systems according to the n144 grid system. • For extension purchases: use the color number from the purchase contract, not the dealer name. • Delivery time approx. 3–4 weeks | free shipping. As an online shop recommended by Nobilia since 2015, we deliver original products directly from the factory. Free shipping, approx. 3–4 weeks. Personal contact in Frankfurt am Main. Kitchen extension: use the color number from the purchase contract, not the dealer name. Original Nobilia codes – this ensures the accessories match the existing run exactly.

ab
97.08
€

Delivery time: 3 – 5 weeks

8 of 30 results

Questions? We’re easy to reach.

Do you have questions about configuration, compatibility with your existing kitchen, or your order?

Our customer service is available Mon–Fri from 09:00 to 19:00 by phone and email.

📞 069-400-500-820
✉️ info@wunschkueche.com