Lacquered panel for room planning in
fixed depth dimensions at
carcass height
Lacquered panel for room planning in
fixed depth dimensions at
carcass height
Lacquered panel for room planning in
fixed depth dimensions at
carcass height - 1
The Nobilia lacquered panel UWKRL16-107 at carcass height: 72.0 cm height, fixed depth dimensions, lacquered edge on both sides.

Technical data:
• Product type: Lacquered panel base unit carcass height
• Carcass height: 72.0 cm (Standard)
• Height: 72 cm
• Made in Germany | 5-year manufacturer's warranty | Original Nobilia product

The nBOX system with 10.7 mm drawer side height comes as standard in all Nobilia base units with pull-outs. The undermounted runner makes the entire drawer content accessible. SoftStoppPro provides bidirectional damping – not only insertion, but also pulling out is gently slowed down. No impact, no noise, tested for over 60,000 load cycles. The Nobilia robot laboratory simulates real kitchen scenarios daily: opening, closing, loading, cleaning – monitored during ongoing production, not just during development.

Scope of delivery:
• Original Nobilia product, delivered directly from the factory – no middlemen.
• Compatible with current Nobilia ranges based on the n144 grid system.
• For extensions: use the Nobilia original code (color number) from the purchase contract.
• Delivery time approx. 3–4 weeks | free shipping.

Direct delivery from the Nobilia factory: approx. 3–4 weeks, free shipping. Nobilia-trained contact in Frankfurt am Main – accessories from older collections are also often still available.

Existing customer? Use the decor number from the original purchase contract. Dealer names vary.

Lacquered panel for room planning in fixed depth dimensions at carcass height

Width: 1.6 cm, Depth: 106.6 cm, Height: 72 cm

Delivery time: 3 – 5 weeks

Article number: UWKRL16-107

Configuration
Depth
25 cm106.6 cm
cm
Height
25 cm72 cm
cm

Please fill in all features

Manufacturer Information
Bei Tiefenkürzungen an Lackwangen wird die Schnittkante mit polymerer Kante belegt. UWKRL*-62 = 619 mm tief für einseitige Inseln mit Schränken in Seitentiefe 561 mm UWKRL*-81 = 807 mm tief für beidseitige Inseln mit LINE N- Schränken in Seitentiefe 561 mm und Rahmenteil in Seitentiefe 202 mm UWKRL*-96 = 955 mm tief für beidseitige Inseln mit Schränken in Seitentiefe 561 mm und 350 mm UWKRL*-107 = 1066 mm tief für beidseitige Inseln mit Schränken in Seitentiefe 561 mm und 461 mm UWKRL*-117 = 1166 mm tief für beidseitige Inseln mit Schränken in Seitentiefe 561 mm und 561 mm